• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Choosing uPVC Replacement Window Handles

The majority of customers agree that upvc replacement handles are easy-to-install and feel great. But it's important to understand that the type of handle you pick is the one that's right for your window.

The step height is the most crucial factor. It is the distance between the handle and the frame or base. Other considerations include lockable designs and mechanisms.

replacement double glazing windows parts

There is a broad selection of replacement window handles made of upvc available for purchase. There are many designs and colors to pick from, so you're bound to find one that will match your windows. It's easy to make impulsive purchases, particularly when the handle is damaged, so it's a good idea to look over some things before you commit to buying a replacement. The first thing to think about is what type of upvc handle you currently have and what the difference between kinds is. The table below shows the most popular handles to help you identify the one that will fit your windows made of upvc.

Most double-glazed windows today have epag handles. They are typically attached to the frame using two screws that screw into the frame from both sides.

The spindle bar in the back may be of different sizes, and can determine if they are left-handed or right-handed. It is important to determine the measurements of the handle you currently must ensure that you order the correct replacement.

Usually fixed with two bolts similar to the Espag handle, they have a low projection from the frame, which means that the handle will not poke through your blinds. This is a great option for blinds on your windows made of upvc and want to make sure the handle will blend in with the blinds.

Cockspur handles resemble Espag handles, however they have a nose which closes over a wedge that sits on the frame of the window. This type handle is found on some older wooden and Upvc windows.

On casement windows the tilt and turn handles are operated by turning the handle or pressing the top of the window. This allows you to open the window from inside and clean it from outside, without having to climb a ladder or step across the fence. These are also a great option for those who have limited mobility and enhance security and access to the home.

Tips and tips and

Many people will have to replace their upvc replacement window handles window handles at some point. When this occurs it's best to know a few hints and tips to make the process be as smooth as it can.

Check what type of handle is in your home. Depending on what the handle is attached to and which locking mechanism it uses, it may be necessary to change the entire handle and lock. If the roller cams and shoot bolts (espags) are stuck or are getting stuck, you'll need to replace them, along with the handle.

Thankfully, the majority of uPVC handles are identical and adhere to industry standard sizes, making replacing them a relatively simple task. The first step is to remove the screws from the handles. These are usually pozi-drive screws. Once the screw covers are removed you will be able to take apart the handle.

It's a great idea to note how much the spindle protrudes from the base of your handle when you remove it. This will help you measure the length of the spindle to determine a replacement handle. To do this, measure the amount of the square peg sticking out from the base of the handle and use that as a reference.

This is especially true for inline uPVC handles for windows, since they are always straight and only open to the left or right. They will not work in the middle. If you're unsure of the kind of handle you have at home, it might be beneficial to get a handle from a neighbour's home and observe how it operates to get an idea.

Another excellent method to figure out what the handed of the uPVC window handle is to look at how the handle turns when operating. Handles can be turned clockwise or counter-clockwise. If you're not sure, you can always ask someone else to open the window with the handle, and figure out how it works in this way.

Measure the spindle

It can be difficult to choose the appropriate replacement handle for your window since different handles do not have the same size. The spindle is the part that is the mechanism that locks the window and it is essential that when you fit the new handle that you measure the length of the spindle precisely to ensure it fits. There are many different types of uPVC handles that operate in various ways. It is crucial to determine which one you have, and what locking mechanism you have.

Espag handles come with a spindle that extends from the rear of the handle and then into the lock gearbox that is within the window frame. When you turn the handle, this then turns the lock in the gearbox, allowing you to open the window. They are installed on uPVC windows with casement. They can be locked using keys to provide additional security.

Cockspur handles are usually found in older double-glazed uPVC window frames. They have an "nose" that is secured by a wedge-shaped striker block. They are also simple and can be locked using keys. It can be more difficult to replace these handles as they are not as popular as the handles with espagnolette.

If you own a tilt-and-turn uPVC, you will require a replacement handle with a different locking mechanism. The handle can tilt the window and also allow it to be rotated around to fully open it. You will need to ensure that the handle you pick has a spindle length at least 55mm, or it will not be able to get into the frame of the window.

The same procedure can be used to remove and replace the uPVC handle. However, you'll have to be careful when you remove it. You may have to open the window a bit larger than normal to ensure that you can access both screws that attach it to the frame. Once you have put in your new uPVC handles and confirmed that they are in the proper position and tighten the screws and then test the lock to ensure it is working correctly.

Replace the handle with the new one.

Once you have the right replacement handle, it should simply be screwed into the appropriate position. This will require a screwdriver, but could be simpler with an electric one. When screwing, it is important not to over tighten the screws as this can cause the handle to break or warp.

The second step in installing the handle is to insert the spindle. The spindle is a part that runs through the handle to operate the locking mechanism inside the window. It is important that the part fits correctly to allow the window to open and shut securely.

There are many different types of uPVC handles. These include:

Espagnolette Handles - these are handles that are inline and can be used on tilt and turn windows to open the window.

Cranked Espagnolette Handles - these are similar to the inline handle, but have a curvaceous design that is ideal for windows in hard-to-reach locations.

Tilt and Turn Handles These are used on tilt and turn windows for operating the closing and opening mechanisms.

These are the most commonly used and the majority of uPVC windows have these in place. They are commonly called 'Bay Windows' in the UK.

It can be a hassle If your uPVC handle fails. There is no need to change the entire uPVC windows because of a broken window handle. There are a few simple steps you can follow to fix or replace a damaged uPVC handle.

By identifying the kind of window you have, measuring the length of the spindle, and then purchasing a replacement handle you can quickly fix the broken window handle. When working with tools and windows, it is important to consider safety first. However this is a fairly easy task. It can mean the difference between having a secure and secure home or Upvc Replacement Window handles a window that is easily opened. If you have any concerns or would like to speak with a professional regarding replacing the handle on your window, call Bridgewater Glass. We have a team that is experienced and knowledgeable to help you with any issue.