• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Ghost Immobiliser 2

Secures your vehicle from key cloning and stops thieves from driving it with your original keys. Our most recent immobiliser connects to the CAN data network in your vehicle and a unique PIN has to be entered to start the engine.

Unlike trackers Ghost doesn't transmit any radio frequency signals and cannot be detected by diagnostic tools. There are also no LED indicators or buttons giving away its presence within your vehicle or van.

Anti-key Cloning

The Ghost immobiliser was designed to combat key cloning. This device connects to the CAN data network in your vehicle and creates an unique pin code sequence that is activated by pressing the buttons from the factory on your dashboard and steering wheel. This stops the criminal from being capable of starting your car. If the wrong PIN is entered, it will stop your engine from running, making it impossible for you to drive away with your pride and Joy.

ghost immobiliser cost immobilisers employ an innovative technology that is extremely difficult for thieves to beat. The ghost immobiliser for sale immobiliser, unlike physical deterrents such as wheel locks and steering lock that can be cut, is a discreet electronic device. It's not even recognized by thieves as it doesn't emit radio signals and functions in a quiet manner.

This next-generation immobiliser will protect your car against a variety of threats, including key-hacking, relay attacks and duplicate copies. It also stops a thief adding a key or replacing your ECU since it will not allow them to start your vehicle without entering the correct PIN code.

In contrast to other immobilisers the ghost immobiliser 2 does not require any additional key fobs or remotes to operate. It is deactivable using an app on the driver's smartphone. This is ideal for those occasions when you need to hand your car to valet parking or maintenance without key fobs.

The Autowatch Ghost-II represents the latest evolution of Ghost immobiliser. It is designed to be as simple and easy to use as it is possible, while remaining as secure as ever. This is achieved by connecting the Ghost-II with the vehicle's CAN data network, meaning there are no extra wires that can be hidden or easily discovered. It also features a built-in feature that allows you to disable your Ghost-II by connecting to the vehicle's Bluetooth, so you can go out and drive with no hassle.

OBD port hacking

OBD port hacking is the newest method employed by professional car thieves to steal cars. Thieves can gain access to your vehicle's OBD using the help of a laptop, mobile app, and some cables that are available on the internet for less than PS50. Once they have access, they can do whatever they want to do, from resetting your vehicle's fault codes, tuning your car, or even getting it stolen in under a minute.

If you have an ghost car immobiliser immobiliser fitted it can stop your car being stolen using this method, by requiring that an unique PIN code sequence is entered into your key fob in order to start the engine and drive away. It communicates with the vehicle's ECU (Engine Control Unit) by using the CAN Data Circuit. It is not detected by any scanners for RF or code grabbing. It also has a Service/Valet Mode that allows your vehicle to start without the PIN code.

You'll also require cables with OBD pins that are connected to the CAN bus. These cables can be found on eBay and Amazon for around P50. You will also need cables with OBD pins that connect to the CAN bus. These can be found on Amazon/Ebay for about PS50. The next step is to connect the cable into the wire harness of your car for example, the radio wiring harness.

Once the hacker has gained access to the OBD port of your vehicle, they are able to send diagnostics to the system at a high baud rates, which will crash the car's CAN and prevent the systems from working. This can cause the engine to stall, doors to lock and even the brakes to be engaged.

No need to purchase additional remotes or key fobs

A car immobiliser is a fantastic piece of anti-theft technology used by millions of modern vehicles around the world. An aftermarket immobiliser protects your vehicle with engine ECU software that blocks cars from starting if the transponder is false.

However, it could be easy for thieves to get around an immobiliser system if they have access to the code to deactivate it. A burglar could easily remove the battery from many key fobs by prying them open. They could then use an instrument to take out the internal circuit board of an immobiliser and replace it with blank. They'll then be able to start your car.

The TASSA approved Ghost 2 is an immobiliser that does not require any additional keys or remotes. The immobiliser communicates directly with the vehicle's ECU (Engine Control Unit). This is accomplished through a discrete, silent data loop in the CAN which is not detected by diagnostic tools such as those used by high tech thieves. It also doesn't make use of a traditional key-fob that has LED indicators, meaning it's not visible at sight.

You may need to deactivate Autowatch's Ghost 2 automatic protection at times like valet parking or a service job. The ghost CAN immobiliser has a special mode to do this, referred to 'Service Mode' which can be activated with the touch of the button on your phone. The car can still be operated, but the maximum speed is restricted to 36 mph.

Contact us today to arrange an appointment for a demonstration in our workshop. A member of our team will run through the entire process of the system's operation and will provide you with owner's manuals, installation certificate, ghost immobiliser installers near me 2 emergency card and security assurance.

Simple Change of PIN Code

Ghost is a next-generation device that protects your vehicle without cutting wires or putting in aftermarket key fobs. It is directly connected to the vehicles CAN data network and ghost immobiliser 2 a personalised PIN code is programmed into it by pressing buttons on your steering wheel & dash. The device does not emit RF signals, which means it cannot be bypassed. This makes it inaccessible to sophisticated scans using RF or code-grabbing technologies that modern thieves use.

The PIN code sequence can be altered anytime you want to block prior drivers, and it even has an override code in the event of a sequence that is not remembered. The installer will demonstrate the procedure to accomplish this during installation. The system comes with a valet-mode feature that can be used to temporarily disable pin input sequences so that your garage or mechanic can service the vehicle without having to know the code. This is ideal for customers who want to give their vehicle for valet parking or service but still don't want to divulge the pin sequence.

ghost 2 immobiliser fitting near me is a discrete system that uses the buttons on your vehicle to create an unique and interchangeable PIN sequence. This sequence is entered through the app on your smartphone, which means no extra LED indications are being thrown, and your vehicle is secure and safe from the possibility of being disabled by hackers or any other technology.

Every vehicle is tested

A ghost immobiliser, in contrast to key fobs which require pressing buttons, is hidden under the dash or steering wheel. You won't even know it's there. The device is connected to the vehicle's CAN data network, and an individual PIN code is inserted using existing buttons on your vehicle. The system then prevents your engine from starting unless this code has been entered before. This means that thieves are unable to duplicate the keys of your car or access the OBD to hack into it.

Ghost is a feature that can be found in all vehicles including electric cars, vans motorhomes, and bikes. It's also extremely flexible and can be programmed to turn off in various scenarios. For instance, it could be set to enter Valet mode when the car is taken to a valet park or a service provider. This means that your vehicle can be operated within a pre-determined 30mph speed limit. The ghost immobiliser will reactivate itself when it is returned to your possession.

Another fantastic feature is that the device can be reset to your personalised PIN code at any point. This is a great option if you lose the code, or if the device becomes unusable.

It's also worth noting that the device is unnoticeable to anyone who isn't familiar with it. This is due to it running through the buttons that are already on the dashboard of your car and on the steering wheel and utilizes the information they send to determine which button has been activated. This makes it a secure and reliable security system that isn't affected by jamming, RF scanning, or door lock pick sets.