• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Window Sash Repairs

Regularly inspect the window sashes for damage, mildew, and mold. If you catch these issues early you will save money on future repairs.

The sash is an interior frame that moves up and down vertically in windows that open. This article will show you how to make several easy repairs to your sash.

Weather Stripping

Wooden window sashes can give an elegant appearance to your home. They are also sturdy and can last many years provided they are properly maintained. They may, however, get damaged or deteriorated over time due to exposure and normal wear and tear. However, sash repair windows experts can restore your windows to their original condition and keep them looking fantastic for longer than replacement windows.

Weather stripping is the most important aspect to consider when you are repairing windows with sash. It's located on both the frame and the sash. It can cause drafts if worn or loose. To fix it, begin by determining the brand of your window and the date of manufacture for the glass (etched in the corner of the glass or on the aluminum spacer between panes). Then, take the sash off and mark its height and width, so you can find the appropriate weather stripping replacement to match.

Then, take it off and place it on a surface to allow access to all four sides. If your sash was double glazing window repair (srv29897.ht-test.ru's website)-hung, take out the weights with their ropes that should fall into the pocket inside the jamb lining. After you have removed the sash using the utility knife, you can remove the weather stripping from the old sash by hand Double Glazing Window Repair or with the putty blade.

When the sash is clean, you can replace the parting stops. These are long pieces that separate the sashes. Pam prefers the standard 1/2-inch by 3/4-inch window trim from the lumberyard. But, you can substitute for a scrap piece of lumber.

After removing the stopper and cutting it to length, apply a thin coat of glazing compound on the bottom of the sash. Smooth out the compound using your putty knife, then let it dry for at least a day. When it's completely dried then apply a top coat of acrylic latex paint. This will help protect the putty, and give your sash an updated appearance.

Sash Hardware

The hardware that supports window sashes is prone to wearing out from the wear and tear of use, and the result can be a window or door that can't be opened or closed easily. The good news is that fixing and replacing this hardware is typically quite simple and inexpensive. If a sash becomes difficult to operate, try spraying some lubrication into the jamb channel and then open it to see if it fixes the problem. If not, the problem is likely with the sash balance, and you'll have to take off the sash to gain access to this hardware.

Ideally, window sashes must swing open and closed without effort, however, this can be difficult when the weights wear out or if the sash meeting rail isn't properly coated. This issue could be caused by a number of things, such as insufficient maintenance or a mismatched weight rating for a particular window sash.

If the hinge arms of a window are starting to sag, this can cause the sash to drag and eventually strike the frame in the corner that's directly opposite the hinge arm (Photo 1). To address this problem, first ensure that the sash fits squarely in the opening of the frame and then take it out of the window. If the sash has been screwed to the hinge arm, you'll need to remove the hinge arm and replace it (Photo 2). Install the new sash (Photo 3).

Because of sagging hinges and a general lack in energy efficiency, older windows particularly those in older homes, may be difficult to open or close. In many cases, a few simple fixes can help these windows function smoothly and save homeowners money on their energy bills.

To complete these sash repairs it is essential to have all the tools needed before you begin. Mark the hinge channel location on the frame (Photo 1) using pencil. This will assist you in getting the channel back on position correctly after you've completed. Remove the sash and remove the hardware including the beads that separate (Photo 2) and the cords or chains that secure it. Soften any hardened putty with a heat gun set to medium and fitted with a shield for the nozzle. Remove the old sash, and store it in a bag labeled.

Sash Weights

Sash weights are able to be replaced to improve the operation of your window sash and decrease the energy cost. Sash weights are heavy, lead or iron cylinders enclosed in a concealed cavity and connected to the movable the sash with rope. These weights function as counterbalances, allowing you to open and close the window without requiring mechanical or electrical devices. When they fail, sashweights are usually neglected or not used by homeowners.

A weight in a sash that has fallen out of the cavity is difficult to recover and you'll need to find a new one that is suitable for the. You will also require a new piece string, a length sashcord and some sashpulleys to tie the new weights to the cord.

Mortise and Tenon joints can be used to join older wood windows. Hammers and pins can be used to cut off the wood pegs that hold the components together. The majority of them are large on one side and smaller on the other. It is crucial to remove first the smaller diameter sides. Sashes that were made later in the century used glue instead of pegs and can be separated by cutting through the glue line with a knife, then tapping the mortised area loose with a mallet.

After the sash is removed, you can remove the sash stop and gain access to the weight pocket. Usually this is accomplished by drilling an opening at the bottom of each jamb. This hole is covered with the wooden panel which can be removed to reveal the inner workings.

Once you have the sash stopped and the access panel removed, you'll be able to take off the old sash weight and replace it with the new. Be sure to weigh the sash before you do this, since the old weights could be different sizes than the one you need. Once the new weight is installed, run the string through the sash pulling mechanism. Then nail the string to the frame, but only leave a few inches of string protruding from the head to allow for future adjustments.

Sash Cords

Most old double-hung windows have a cord or chain attached to the weights that helps keep the sashes level within the jamb. Over time, these cords could break, making it impossible to raise the window. A new sash cord will restore the ability to move the sash upwards and downwards and hold it in place when it is opened.

To replace sash cords the first step is to remove the access panels from the jambs. These are usually nailed or screwed in and will need to be removed or repositioned. It is possible to remove them with a hammer or chisel, but it is always better to lay out dust sheets before beginning any work.

After removing the access panel, you can begin to work on the sash. Utilize a flat bar, or chisel, to pry the narrow partsing beads out of their grooves. These are often wedged in or nailed in, but they can be snipped out, so it's worth taking your time. If the sash remains in place, pull the mortise-and-tenon joints out using a hammer or screwdriver and then take out each wood peg. You should now be able to move the sash around without difficulty, though it might require oil if it feels stiff.

With the sash in an open position Take a measurement of the sash chain to extend from the pulley in the top of the jamb to the sash slot on the bottom. Cut the cord or chain and secure it in the previous step. You can use a hammer, nails or screws. However nails are less likely than screws to cause damage.

Unless you've bought a kit that replaces the counterbalance system that was in place before, it's recommended to keep the original weights for balancing in place. They are not expensive and are easy to install if you buy them from salvage shops for architectural use. Depending on the size and shape of your window, you may need to use one or two sashweights to keep it open.