• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and aluminium, they are not susceptible to rust or rot.

It is essential to clean and oil UPVC windows and doors on a regular basis. This will reduce costly repairs and improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a great amount of damage to your home, which can make it very dangerous and potentially fatal. It is essential to take the time to make sure that you're doing everything you can to keep your windows in good condition.

For single pane windows, it is relatively easy to replace them, and the replacement is usually able to fit into the frame of the previous one easily. However when you have double pane windows that are secured by internal beading, it will be more difficult to take out the panes that are in place and replace them with new ones. In this case, you will need to locate some plastic spacers that will help the new pane to fit perfectly into the window frame.

If you are going to try to remove the window panes yourself it is crucial to wear the proper safety gear that includes gloves with a thick layer of material and eye protection. You should also lay down a dropcloth prior to you begin working on the window panes, so that any shards fall onto the fabric and not on the floor, where they could be trampled.

It's a great idea cover the gap with tape after the glass is removed. This will stop water and drafts from entering your home until a professional is able to repair the window. It also acts as a barrier that will prevent any intruders to gain access into your home. If the gap is particularly large, you may be interested in a security door that has an integrated window, since it will provide the best of both worlds.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash window. In time, they could develop a variety of issues such as sliding. A sagging window in uPVC can cause problems with light, draughts, and even security. It is crucial to act immediately if you realize that your uPVC windows are sliding.

To repair timber windows a window that is sagging, you can try to reposition the hinges. First, you'll need to unblock the windows to reach the frame. Then, using an screwdriver, unscrew the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've repositioned the hinges, close your window and check for an appropriate fit. If you're happy with the fit, you can tighten the screws to ensure that they remain in position.

If you are unable to move the hinges, you may have to replace the seal. Rubber seals can dry out and lose their elasticity over time, causing them to lose their tightness. It is essential to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.

uPVC handles may also loosen up. This is typically caused by screws that have been removed over time, but it could also be due to the mechanism of the handle getting worn out. It's fairly simple to fix a loose uPVC handle. First, you'll need to shut the window and do a test fitting. The joint at the corner of the sash should align with the joint on the casing. If it isn't, you can use a screwdriver or a wrench to loosen the handle, and Repairs to uPVC Windows then return the mechanism to its original position.

3. Water Leaks

It is important to take action if you awake each day to find mouldy walls and wet floors. Water leaks through windows can cause structural damage to your home and affect your ability to regulate the temperature of your home. The most frequent reason for leaks in uPVC windows is that the sealant surrounding the frame is either damaged or missing.

This is a fairly simple fix that can be done by any DIY expert. Depending on the severity of the issue is, old caulking may need to be removed. It is important to keep in mind that when it comes to uPVC window repairs, you should avoid the temptation to "over-caulk' as this will only make the area more difficult to clean and can reduce your energy efficiency.

It is essential to ensure that any drainage holes are clear of debris and that the sill pan has been angled properly so that it drains away from the window. In more serious situations, you may have to replace the window.

Moldy sills and rotten ones are also signs of water leakage. This mold thrives in damp environments and can quickly spread across the house.

If the leakage is occurring between the double glazed windows repairs-glazed glass, it is more likely that the problem is with the seal rather than the frame. A uPVC specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open, or if it opens with the breeze. They can be easily repaired by any DIYer who is skilled and can be completed in a matter of minutes.

Almost every household in the UK will have either top hung or side-hung uPVC windows that have hinges and like any mechanical part they will wear out over time. It is very easy to change a window hinge however it is easier if someone else helps hold the frame.

It is also important to verify that the uPVC hinges are being opened and closed in the correct direction. This can be done by looking for the arrows on each hinge, this indicates the direction in which the window should open.

The problem with the hinges on windows can be caused by incorrectly opening the window in a certain way or due to inadequate installation at the factory. Sending us a photo through our website can often solve the issue. We are more than happy to give assistance.

Regularly lubricating hinges is also essential. This can be accomplished by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can allow the window to operate and close more smoothly. It also decreases the possibility of a window sticking and help prevent corrosion. Ideally, you should perform this every year. WD40 or other solvent-based lubricants should not be used as they could damage your uPVC windows.

5. Draughts

Draughts can be caused by different factors. The hinges can also be unbalanced due to wear, which can cause gaps between the frame and sash. If they are damaged beyond repair, it may be necessary to get them re-aligned. The second is the interlock, which is located on the hinge of the window and can also become misaligned, again it may be possible to give them a clean but in some instances it could be necessary to have them replaced.

These seals are susceptible to wear and tear or be damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity lenses. This will help to regulate indoor temperatures and decrease the possibility of draughts.

The last way to reduce the amount of draughts is to use a Draught-excluder. These are typically fabric tubes filled with a filler, which can be put on top of your window sill. They will keep your home warm by blocking out cold air.

The windows made of upvc can keep providing excellent insulation and security for your home by performing regular maintenance and repairs. However, it is important to recognise that all windows have a life span and there may come the point when it's more efficient to replace them than repair them. If you encounter any issues with your window made of upvc you should consult a professional as soon as possible.