• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

When It's Time to Repair Windows

If your windows require repair, you must work with care. First, put on a pair of safety gloves and cut-resistant gloves to prevent shards of glass from slicing you while you work.

Covering the crack with a plastic sheet over the crack is a quick solution for a window that has cracked. This will prevent rain, snow and insects from getting into your home.

Cracked Glass

Glass that is cracked not only make your home look less appealing, but it can also allow drafts and other elements to enter the home. If the cracks were caused by an collision (like an impact from a soccer or baseball ball) or are the result of stress, such as an abrupt change in temperature, it's important to get them fixed as quickly as possible to prevent further damage and keep your windows operating properly.

Use clear tape to cover your damaged window repairman if it is not broken. It's a simple and inexpensive solution that will provide some protection from dust, water bugs, and other squatters and also keep out the weather.

However, if the crack is extensive or appears to be getting worse, it's recommended to consult an expert. A skilled glazier can determine the root of the problem and Repair Windows suggest a suitable repair method.

An impact crack is the most common type of window break typically resulting from a hard object striking your window with enough force to fracture it. These cracks are usually accompanied by a starburst pattern of lines, and shattered pieces that can be dangerous if they fall loose. This crack can compromise the gas that is between the panes of your double-pane windows and decrease its energy efficiency.

Another type of crack is a stress fracture, which can develop gradually over time because of extreme temperature changes or other environmental elements. These cracks begin around the edges of your window and can eventually grow into full-blown cracks.

A pressure crack is a much more serious crack however it can be fixed. It is a curvy, straight line that can stretch across the window on one or more sides. It can be caused by low or high pressure, which can cause the glass to expand or contract.

If you're willing to go a step beyond tape and nail polish, there are several alternatives to fix cracks in your window glass. Glass Repair Film, while more expensive it will provide your windows with more protection and durability. If you'd rather take the DIY option, epoxy is a strong adhesive that can be used to fill cracks to prevent further damage and make your window appear like it has never had a crack at all!

Leaking Windows

If you notice a damp spot under your window or that the wood surrounding it is soft or decaying, it may be the time to fix your windows. Mildew and mold thrive in humid conditions which can cause various issues within your home. They can affect the quality of indoor air, lead to sagging drywall, and can worsen symptoms of allergies. If left unchecked, they can also cause structural damage to the home.

It's best to call an expert if water is visible or leaking from the outside. Don't ignore leaking windows. They're a major cause of mold and structural damage.

In many cases, a thin caulking layer is enough to stop the leaks. Before applying the new caulking, you'll have to clean the area and remove any existing caulking.

Check the weepholes of the frame for any debris. These holes are designed to remove rainwater, but they can also become blocked in time due to insect corpses or other debris.

If windows are double-paned it is also necessary to examine the seal between the glass and the frame. This will help to maintain the gas from escaping between the panes, which makes windows more energy efficient. Over time the seal may get worn out and let water to enter your home.

Water stains on ceiling and walls are another indicator of the presence of a leak. The drywall becomes discolored when it is saturated by water. There may also be peeling paint caused by the effects of the water weakening its adhesive properties and tearing away from the wall.

Faux Muntins & Mullions

In the past muntins (or glazing bars, as they are referred to in the UK) separated and were used to hold the panes of multi-paned windows. Since the larger expanses of tempered glass became available after WWII They went out of fashion. Nowadays, they're used as a decorative feature in some older homes.

The effects of rain or wind can harm a single support or a small group, leaving an opening in the window. The good thing is that you are able to repair the majority of these decaying or brittle elements.

First take a rag and clean the affected areas. Use ammonia-based cleaning products that will not leave residue. Remove any loose or rotting pieces and cut the intersections of the horizontal and vertical repairing window muntins using an exact knife. After trimming the intersections using painter's masking tape, you can use the tape to tape off the lower section of the window frame. Now, you're able to apply a thick coat of white paint, paying close attention to the areas that were lightly coated on the first go. Allow the paint to dry completely before removing the tape and applying another coat.

If the problem is more severe like an hourglass-shaped fracture in the middle of the window, it's recommended to replace the sash. In these situations it's crucial to find a replacement window that matches the design and size of the present one.

If you want to save money you can also put in an attached grid window. These windows have a full pane of glass, with the muntins being attached to the surface which gives them a split look. They're not as efficient as traditional windows, however.

Installing a drip cap can stop water from getting into the window frame. The majority of home centers sell aluminum drip cap options for about $20. These are much easier to install than replacement windows sashes, and will provide the same function as a genuine mullion or muntin.

Broken Sashes & Frames

A broken window sash can be an obvious indication that it's time to get some help. A damaged sash, not addressed, can lead to water leaks, wood rot, and other serious problems to the frame and sill. If you've damaged your sash, you should replace it as soon as possible to ensure that the window is sealed.

Most of the time, the issue is caused by worn out or improperly installed the sash cords. It's easy to replace these cords on the majority of double-hung window models. First, you'll need to remove the tabs of metal that hold the sash. To do this, you need to push up on one side (it does not matter which side) of the sash and then pull it towards the opposite side to remove it from the window frame. You'll want to carefully remove the parting strip that divides the sash from the other so you can access the location where the sash cords are.

Once you've removed the sash, take the time to look at its metal tabs and compare them to those of your new sash. If they are different it may be difficult to put the new sash in its proper place and could impact how the sash performs. Fortunately, this can be easily fixed by placing tabs in the correct positions on the new window.

You'll have to examine the frame of your window, too for any damage or decay. It's a good idea check it regularly since wood shrinks and wears down as time passes, particularly with exposure to the elements. If you spot any visible damage, it must be repaired as soon as possible to prevent the development of a larger issue.

If your window frames are in bad condition, you'll need to treat them using a homemade preserver made using half mineral spirits and half boiling linseed oil. After the treatment has dried for two full days, you are able to re-finish your frames using a high quality latex paint. A new coat of paint can help to protect your window from the elements too.