• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are durable, long-lasting and easy to maintain. They don't decay or rust as aluminum or timber.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will reduce repair costs and increase energy efficiency.

1. Broken Glass

The broken glass in your windows can cause serious damage to your home, and could even be fatal. It is important to take the time to ensure that you're doing all you can to keep your windows in good repair.

Single-pane windows are relatively simple to replace, and they generally fit into frames that were previously in use very easily. If windows with double panes are joined by internal beading, it is difficult to remove and Repairs to uPVC Windows replace the old panes. In this instance you'll need to source some plastic spacers that help the new pane to fit perfectly into the frame of the window.

Wearing eye protection and thick gloves is essential if you plan to remove the glass by yourself. It is also a good idea to lay down a drop cloth before you begin working on the glass so that any fragments of glass fall on the fabric instead of landing on the floor, where they could be trodden under and cause further damage.

It's a great idea to tape the gap once the glass is removed. This will prevent water and drafts from entering your home until a professional is able to repair the window. This will also act as a barrier, preventing any intruders to gain access to your home. If the gap between the door and the window is substantial, you may prefer a security screen that also includes an opening. This will give you the best of both.

2. Sagging

Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash windows. However, with time, they may be afflicted by a variety of issues like sliding. A sagging uPVC windows can cause issues with light, draughts, and even security. If you find that your uPVC window is beginning to sag it's crucial to act fast to stop the issue from becoming worse.

To fix a sagging window you can try repositioning the hinges. First, you'll need to open the windows to access the frame. With a screwdriver, you can remove the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after having moved your hinges. If you're happy with the fit, you can tighten the screws to ensure they stay in the right place.

If you can't reposition the hinges, you might require replacing the seal. Rubber seals can dry out and lose their elasticity over time, which causes them to lose their tightness. It is essential to replace your seal as soon as you can in order to ensure that your uPVC window watertight and draughtproof.

uPVC handles may also become loose. Often this is due to screws that have become loose over time. However, it could also happen because the handle mechanism has worn out. Luckily, it's not difficult to fix a loose uPVC window handle yourself. First, you'll need to close the window and perform a test fitting. The corner joints of the sash should align with the casing joint. If it doesn't, you can use the screwdriver to loosen up the handle. Then turn the mechanism back into place.

3. Water Leaks

If you awake to wet floors and damp walls every time it rains it is important that you take action. Leaks of water from windows can cause structural damage to your home, and hinder your ability to control the temperature of your home. The most common cause for leaks in uPVC windows is that the sealant surrounding the frame has been damaged or Repairs to uPVC Windows missing.

This is a simple fix that can be done by any DIYer who is competent. Depending on how serious the issue is, old caulking may have to be removed. It is crucial to remember that when it comes to uPVC window repairs, do avoid the temptation to "over-caulk' as this will only make the area harder to clean and can reduce your energy efficiency.

It is crucial to make sure that the drainage holes are free of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more extreme instances, you may need to replace the window.

Mold spots and rotten sills are also signs of water leakage. The is a fungus that thrives in damp conditions and can quickly spread throughout the house.

It is also important to remember that if the leak is coming from between the glass of your double glazed windows it may be more likely to be a problem with the glass seal, rather than the frame or sliding. A uPVC specialist can fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges may be to blame for the reason that your uPVC window is difficult to open, or if it opens with a breeze. They can be easily replaced by any competent DIYer and can be completed in a matter of minutes.

Almost every household in the UK will have either top hung or side hung uPVC windows that have hinges and like any mechanical part they can wear down over time. Changing a window hinge is an easy process, but it's simpler when you have a person to assist in holding the frame in place.

It is also important to verify that the uPVC hinges are opening and closed in the correct direction. Look for the arrows on each hinge to determine which way the window should be opened.

The issue could be caused by opening the window improperly or due to a poor installation at the factory. This issue can be fixed by sending us a photograph on our website. We will be more than happy to give you suggestions.

Regular lubrication of hinges is also essential. This can be accomplished by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can help the window operate and close more easily. It can also stop corrosion and decrease the chance of sticking. This must be done at a minimum every year. WD40 and other solvent based fluids are not recommended since they can damage the parts of your uPVC window repair near.

5. Draughts

Draughts can be caused by different things. The hinges may also become disaligned as a result of wear, which can cause an opening where the sash and frame meet. This can be easily fixed by giving them a good cleaning, but if they are beyond repair it could be necessary to get them aligned or replaced. The interlock, which is located on the hinge of the window, can be misaligned. Again, it is feasible to give them a thorough clean, however in certain cases, it may be necessary to have them replaced.

The next most common reason for draughts is window seals. They can become worn down or damaged over time, and let air escape through these gaps. Installing high-quality weatherstripping is a good way to prevent draughts. Another alternative is to replace the window with low-emissivity glass, this will help to regulate indoor temperatures and again will lessen the possibility of draughts.

The last way to reduce the amount of draughts is to use a Draught-exclusion device. These are usually made of fabric tubes filled with a filler, which can be put on top of your window sill. They will help keep cold air out and keep your home warm and cozy!