• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Window Sash Repairs

Window sashes need to be inspected regularly for signs of mold, mildew and other damage. You can reduce the cost of repairs in the future by catching problems in the early stages before they become out of control.

The sash is an inside frame that moves up and down vertically in windows that open. This article will demonstrate how to do a variety of simple repairs to the sash.

Weather Stripping

Wooden window sashes can add an elegant appearance to your home. They are also durable and can last many years provided they are properly maintained. However, they can be damaged or deteriorate in time due to exposure to the elements and wear and tear. Sash repair upvc window experts can restore windows back to their original condition and keep them looking great much longer than replacement windows.

The first step in repair sash window damage is to fix weather stripping. It's found on both the sash and frame. It can cause drafts if damaged or is loose. To fix it, begin by determining the brand of your window and glass manufacturer date (etched in the corner of the glass or on the aluminum spacer between panes). Remove the sash and mark its width and height so you can get new weather stripping that is compatible with the original.

Then, take it off and set it on a table to allow access to all four sides. If your sash was double-hung, take out the weights with their ropes that should fall into the pocket inside the jamb lining. Once you've taken the sash off and the weights, use a utility knife to remove the weather stripping that was formerly in place at the corners, then take it off by hand or using a putty knife.

Once the sash is clear and clean, you can put in the parting stops. These are long pieces that divide the sashes. Pam prefers standard 1/2-inch by 3/4-inch window trimmings from the lumberyard. But, you can substitute with a scrap piece of wood.

After removing the parting stops and trimming them to your desired length and thickness, apply a thin layer of glazing compound on the bottom of the sash. Smooth the compound using your putty tool, and let it dry for at least one day. Once the putty has fully cured and dried, you can apply an acrylic latex topcoat. This will protect the putty, and give your sash a modern look.

Sash Hardware

The hardware that holds the windows sashes can become worn out over time and use. This could lead to windows or doors that is difficult to open or close. It's important to know that replacing or fixing this hardware is usually easy and affordable. If you are having trouble opening a sash spray some lubricant into the jamb channel. Then, slide the sash out to see if this resolves the problem. If the issue persists it's most likely the sash balance. You will need remove the window sash in order to get access to this part of the hardware.

Window sashes need to open and close without much effort. However, this may be difficult if weights are worn out or the sash connecting rail isn't properly glazed. This problem can be caused by a variety of factors, including lack of maintenance or by a mismatched weight rating for the specific sash.

If the hinges on a window begin to sag this could cause the sash to drag, and then eventually to hit the frame in the opposite corner (Photo 1). To address this problem, first ensure that the sash is firmly seated in the opening of the frame and then take it out of the window. If the sash has been screwed onto the hinge arm, take it off the hinge and replace it. (Photo 2). Then, you can install the new sash (Photo 3).

Windows that are old, especially in older homes, may be difficult to open and close due to sagging hinges and general inefficiency. Sometimes just a few easy fixes can help these windows function smoothly once more and help homeowners save money on their energy bills.

To complete these repairs to the sash it is essential to have all of the necessary tools in place before you begin. Start by marking the location of the hinge channel on the frame using a pencil (Photo 1). This will make it easier to place the channel in the proper position after you've finished. Then, remove the sash and remove the hardware including the parting beads (Photo 2) and the cords or chains that secure it. Soften any putty that has been hardened with an electric heat gun set to medium and equipped with a nozzle shield. Remove the old sash and store it in an labelled bag.

Sash Weights

Sash weights can be changed to improve the operation of your window sash, and also reduce the cost of energy. Sash weights are heavy, lead or iron cylinders enclosed inside a hidden compartment and connected to the movable the sash with a rope. They are counterbalancers that allows the window to be closed and opened without the use of electrical or mechanical devices. If they fail, sashweights are often left unnoticed or disabled by homeowners.

A weight from a sash that fell out of the cavity is difficult to recover It is therefore important to find a new one that fits properly. You will also require a new piece string, a length sashcord and a few sashpulleys to secure the weights you are replacing to the cord.

Older windows made of wood are joined by mortise and tenon joints. The wood pegs holding the parts together can be removed using pin punches and hammers. The majority of these pegs have an enormous diameter on one side and a smaller one on the other, so it is crucial to take out the small-diameter sides first. Later sashes used glue instead of pins. They can be separated by using a knife or mallet.

After the sash has been removed and removed, you can take off the stopper on the sash and get access to the weight pocket. Usually this is accomplished by drilling an opening in the bottom of each jamb. The hole is then covered with a wooden panel that can be removed to reveal the inside workings.

After the sash has been stopped and the access panel is removed, you can remove the weight that was previously installed and replace it. Be sure to weigh the sash before you begin, as the old weights may be different in size from what you require. Once the new weight is installed, run a string through the sash pulling mechanism. Then, attach the string to your boxed frame. Leave a few inches protruding at the top of the string to allow for future adjustments.

Sash Cords

In the majority of old double-hung windows, a cord or chain is affixed to the weights. This supports and keeps the sashes of the jamb in a balanced manner. Over time, window sash repairs these cords could break, making it difficult to raise the window. A new sash cable can restore the ability to raise and lower the sash, and ensure it stays in place when it is opened.

The first step to replace sash cords is to locate and remove the access panels in the jambs. These are usually screwed or nailed into and require removal. You may be able to employ a hammer and chisel to remove them but it's best to lay down dust sheets before starting any work.

Once the access panel is removed, Window Sash Repairs you can start working on the sash. Take the narrow beads (also called "tie rails") out of their grooves using flat bar or chisel. They are usually wedged in or nailed but can be snipped out which is why it's worth your time here. If the sash is still in place, break the mortise and tenon joints free with a screwdriver or hammer and then remove each wood peg. It should now be possible to move the sash around freely, though it might require oil if it feels stiff.

Take a measurement of the length of sash cord/chain required to reach the sash slot at the bottom, and the pulley located at the top of the jamb. Cut the cord or chain and fix it as described in the previous step. You can use either a hammer, nails or screws. However, nails are less likely to cause damage.

Unless you've bought an item that replaces the old counterbalance system, it's recommended to keep the original weights for balancing in place. They're not expensive and easy to install if you buy them from architectural salvage stores. Based on the size of your window one or two sash weights could be needed to keep the sash in an open position.