• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Ghost Immobiliser 2

Protects your vehicle from key cloning and stops thieves from driving it using your original keys. Our latest immobiliser connects to your vehicle's CAN data network & a unique PIN code must be entered in order for the engine to start.

Contrary to trackers ghost immobiliser problems; linked internet site, does not transmit radio frequency signals and cannot be detected by diagnostic tools. Also, it doesn't have any indicators in the form of LEDs or buttons that give the impression that it is in your van or car.

Anti-key cloning

The ghost immobiliser is designed to combat key cloning and hacking. This device connects to your vehicle's CAN data network and generates an unique pin code sequence that is activated by pressing the buttons that are factory-installed on your dashboard and steering wheel. This stops the criminal from being capable of starting your car. If the incorrect PIN is entered it will stop your engine from starting, making it impossible to leave with joy and pride.

Ghost immobilisers are new technology that is extremely difficult for thieves to defeat. Contrary to physical deterrents, such as wheel locks and steering locks that can be cut off or stolen, the ghost immobiliser is a discreet electronic device that isn't easily detected by regular thieves since it doesn't emit radio signals and works silently.

This next-generation immobiliser will protect your car against a variety of threats, including key-hacking relay attacks, key-hacking, and duplicate copies. It can also stop thieves from stealing keys or replacing your ECU since it will not allow them to start the vehicle without entering the correct PIN code.

In contrast to other immobilisers the ghost immobiliser 2 doesn't require a remote or key fobs in order to operate. It can be turned off via the driver's mobile using a simple app. This is perfect for when you need to give your car away for valet parking or maintenance without key fobs.

The Autowatch Ghost-II is the latest version of our groundbreaking ghost immobiliser. It is designed to be as simple and user-friendly as is possible, yet remains as secure as ever. This is accomplished by connecting the Ghost-II into the vehicle's data network CAN, which means there are no additional wires that can be hidden or easily located. It comes with an inbuilt feature that allows users to disable the Ghost-II simply by connecting it to the vehicle's Bluetooth.

OBD port hacking

OBD port hacking is a new technique employed by professional car thieves to steal cars. Thieves can access your vehicle's OBD port with no more than an laptop, an app, and a few cables, which can be bought online for under PS50. Once they have access, they will be able to do anything they want to do, from resetting your vehicle's fault codes to tuning your car, or taking it away in less than a minute.

If you have a Ghost immobiliser installed, it will stop your car being stolen with this method by needing a unique PIN sequence is entered on your key fob in order to start the engine and drive away. It does this by communicating with the vehicle's ECU (Engine Control Unit) via the CAN Data circuit and is indetectable to any code grabbing or RF scanning technology. It has a Service/Valet Mode that allows your vehicle to start with no PIN code.

To utilize an OBD hacking device you require an operating system that is capable of reading the OBD protocol. This is available for less than PS100 on ebay or Amazon. You'll also require a cable that has OBD pins connected to the CAN Bus. These cables can be bought on Amazon/Ebay around PS50. The next step is to connect the cable into the wire harness of your vehicle for example, in the radio wiring harness.

Once the hacker has gained access to the OBD port on your vehicle, they can send diagnostics to the system using high baud rates which can cause a crash to the car's CAN and prevent the systems from working. This could cause the engine to stall and doors to lock, or even the brakes to engage.

There is no need for additional remotes or key fobs

The car immobiliser is an excellent piece of anti-theft technology utilized by millions of modern vehicles across the globe. Utilizing engine ECU software to prevent vehicles from starting if a false transponder signal is sent to it, an aftermarket immobiliser is an excellent method of protecting your vehicle.

However, it is simple for a burglar to get around an immobiliser system in the event that they have access the code that allows them to disable it. A thief could easily remove the battery from many key fobs by prying them open. They can then use an instrument to remove the internal circuit board from an immobiliser and replace it with a blank. Then they will be in a position to start your vehicle.

The TASSA approved Ghost 2 is an immobiliser that doesn't require additional keys or remotes. The immobiliser communicates with the vehicle's engine ECU (Engine Control Unit) via a discrete quiet CAN data circuit that is undetectable with diagnostic tools such as the ones employed by high-tech thieves. It doesn't include a traditional keyfob, which has an LED indicators, which means it is invisible.

It is possible to disable Autowatch's Ghost 2 auto ghost immobiliser protection at certain times like during valet parking or during a service. The Ghost 2 immobiliser CAN immobiliser comes with a specific mode for this, referred to as "Service Mode which can be activated with pressing an app on your phone. The car is still operated however the maximum speed is restricted to 36 mph for added security.

If you'd like to know more about the TASSA accredited ghost immobiliser, call us today to book a demonstration in our workshop. A member of our team will explain the process and provide you with your Ghost 2 emergency card, installation certificate, and security assurance.

Simple PIN code Change Process

Ghost is a new generation device that protects your vehicle without cutting wires or installing aftermarket key fobs. It is directly connected to the vehicle's CAN data network and a personalised PIN code is programmed in it using buttons on your steering wheel and dash. The system blocks engine start and cannot be bypassed as no RF signals are generated from the device. This makes it undetectable by sophisticated RF scanning or code grabbing technologies that modern thieves use.

The PIN code can be altered to block previous drivers, or even add an override number if you forget the sequence. The installer will guide you through the procedure to accomplish this during installation. The system also comes with a valet mode feature which can be used to temporarily disable the pin input sequence to allow your garage or mechanic can repair the vehicle without needing to know the pin code. This is a great choice for customers who don't want their PIN sequence to be divulged, but would like to leave their vehicle with valet parking or service.

Unlike Thatcham products which require additional key fobs to operate, Ghost is a discreet system which takes advantage of the buttons on your car to create a unique interchangeable PIN code sequence. The sequence is entered via the app on your smartphone, which means no extra LED indications are being thrown, and your vehicle is safe from the risk of being disabled by hackers or other technology.

Tested for every vehicle

A ghost immobiliser, unlike key fobs that require you to press buttons, is hidden under the dash or steering wheel. It is not obvious that it's there. The device is connected to your vehicle's CAN data network, and a personalised PIN code is programmed by using the buttons already on your car. The system then prevents the engine from starting until the code is entered prior to. This means that thieves are unable to duplicate the keys of your vehicle or gain access to the OBD to hack into it.

Ghost is a great option for all vehicles that use electric vehicles motorhomes, vans, and bicycles. It's also extremely versatile and can be set to deactivate in a variety of situations. It is possible to program it to go into Valet mode, for example when your vehicle is transferred to a valet service or parking company. This means that your car can be operated within a pre-determined 30mph speed limit and the ghost immobiliser will be activated when it returns to your home.

The device can also be reset at any time using your personal PIN code. This is useful when you forget the code or the device ceases to function, meaning that it's effectively just as good as new.

The device is also completely unnoticed by anyone who doesn't even know what it is. This is due to it running through the buttons that are already on your car's dashboard and steering wheel, and uses the data they transmit to identify which button has been activated. This makes it a secure and solid security system that is not able to be altered by RF scanning or jamming, or even a door lock pick set.