• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC Window Handle Replacement

It's easy to replace a broken window handle with the proper tools. But it's essential to identify the type of handle and the spindle's length prior to purchasing the replacement.

Older uPVC windows have cockspur window handles which have an extension spur that can the lock of a wedge cockspur striker plate. These can be left- or right-handed and must match when replaced.

What type of lock and handle do I have?

There are many different types of window handles made of upvc and locks, each having their particular advantages and uses. The type of handle you are using will determine the ease to open your windows and if the locking mechanism works as intended. With time and regular use, window handles made of upvc can become damaged or worn out, making them less secure and efficient. In some cases they may even fall off completely. It is essential to fix your window handles made of upvc when you see them falling off. This will help prevent potential break-ins and protect your home from burglary.

Luckily, replacing your window handles made of upvc is a fairly simple job that can be completed by anyone. With just a few tools and the right knowledge it's a simple procedure that should take no less than a few minutes. To get started you must determine the kind of lock and handle you have on your window made of upvc to help you find the perfect replacement.

Inline Espagnolette Handles

They are typically located on the side of the window. They have a flat design and have a latch that connects to the locking mechanism of the frame of the window when it is turned. Inline upvc handles have a spindle that goes through the centre of the handle and into the window frame to operate the latch.

Cockspur Handles

These handles are typically found on older uPVC windows and feature a distinctive hook-shaped design. Cockspur handles are fitted with a single screw that holds the handle to the frame of the window and aren't as secure as other types of window handles.

Tilt and Turn Handles

In contrast to other upvc handles that are tilt and turn, these handles can both be rotated to open the window, and tilted inwards to let air flow in. Generally, they have a 7mm spindle at the side of the handle. They are available in both left and right-handed versions.

It is essential to know the spindle's size prior to purchasing a replacement upvc handle. There are a few that are the exact same size. Drop something in the middle of the hole to test the length. This is the longest spindle length that will be suitable for your window.

What is spindles?

uPVC window handles work similar to doors, by turning the handle to activate an internal latch within the frame. The window then opens and closed. But, at times, the handles may become damaged, especially when they are used frequently or exposed to harsh weather conditions. This can lead to the need to replace your uPVC windows handles as they may not be able to operate the window properly for a long time.

There are a variety of uPVC handles available including Espag, Cockspur and Spaded handle options. They are made in a variety of ways to fit into uPVC frames. Each handle type uses an entirely different spindle for locking the window mechanism. This is why it is essential to know what type of handle you have installed on your uPVC window to find the right replacement double glazing windows for it.

The base section of the handle will tell the type of uPVC it is. A snap-in cover should be over the screw that holds the base of the handle in position. After removing this you will be able to see the screw that holds the handle base in position. After both screws are removed then you should be able to pull the handle from the uPVC.

After you have removed the uPVC window handle, you have to carefully unscrew the old spindle from the locking mechanism. Make note of the length of the spindle since you will need to ensure that you buy a replacement that has the same length as the original handle and locking mechanism.

The spindle wears down and is unable to operate the locking mechanism. This could be due to corrosion, damage due to frequent use, or the locking mechanism becoming looser. If this happens, you'll have to replace both the window pane replacement handle and the locking mechanism to restore the full functionality of your uPVC Windows.

How do I get rid of the old handle?

Window handles can be damaged or Upvc window Handle replacement destroyed over time. It is important to fix them as soon as you can to ensure your safety. The good news is that replacing a worn or damaged handle is a relatively simple job that can be carried out in just over an hour and doesn't require any special tools.

The first step in removing the old handle is to take off the screw located on the top of the handle base. After the screw is removed, the handle can be removed. A second screw will be located at the base of the handle. This can also be removed. Once these two screws have been removed, the handle can be detached from the window's base.

Once the old handle has been removed, take the new handle and align the fixing holes with the holes that are present in the window frame. If there is a sticker or cap on the new handle, remove it if required and put the handle back in the appropriate position. It is crucial to verify that the handle is working after it has been installed. Turn the handle around and ensure that the lock mechanism is working.

Espag handles come with an elongated spindle that extends from the handle and slot into a multipoint locking mechanism within the frame of the window. Cadenza windows feature a blade with cut-outs that slot into the lock mechanism, while Cockspur handles have an extended nose that hangs over either the outer frame or transom bar cross-member in the window.

Once you have installed the new handle, place the spindle into the window lock and tighten it. When the handle is fixed, replace the'snap in' cover and the screw cap (if applicable). When the handle is in use, open and close the window a few times to make sure it is working properly and securely.

How do I install the new handle?

Changing your uPVC window handle isn't difficult, and the process is quite simple. All you require is a screwdriver, and a little bit of patience. First, make sure that the handle is not locked. Then, remove any visible screws. You could also replace them with screw caps. After removing the handle, you will need to note the length of the spindle which extends from the back. This is important as it will determine what kind of handle to purchase.

Espagnolette handles are the most common kind of handle that is used on uPVC windows. They feature a spindle that runs through the handle and acts as a locking mechanism within the window frame. The handle opens the latch, allowing the window to open. Over time and through regular use, espagnolette handles can be damaged or damaged which is why it is essential to find replacements.

Cadenza handles are another type of uPVC window handle commonly used on tilt and turn windows. They have a protruding knife that works with a multiple-point locking mechanism within the window. They are more secure than an espagnolette handles because they are able to open from the inside. They can be replaced with the same method as espagnolette handles, however you will need to ensure that the new handle has an angled blade as opposed to a flat one.

Once you have selected the correct handle, simply align the new handle with the existing screw holes prior to screwing it into place. You should then put the screws back on and verify that the new handle is working properly. You can do this by moving the handle between the locked position to the unlocked one several times. If you have any issues, it might be worth contacting a specialist to see if they are able to assist you in solving the issue. They can often advise you on the best solution to solve the issue in a quick and effective way.